IBM Deskstar 14GXP Quick Installation Guide v3.0 free download

File name Deskstar 14GXP Quick Installation Guide v3.0.pdf

IBM storage products Quick installation guide Deskstar 14GXP AT/IDE Models: DTTA-371010 DTTA-371290 DTTA-371440 Handling precautions Quick installation procedure 1. Do not cover the breather hole! Covering the Note: It is advisable to backup all data before breather hole may result in loss of data. proceeding with the installation. If your system BIOS cannot handle large capacity drives (due to inadequate address locations, most systems are limited to accessing drives with a capacity of 8.4GB or less), you may need to use a disk overlay program such as Ontrack's Disk 2. Do not press on the drive! Do not apply any force Manager. The following procedure uses the Ontrack to the drive during handling or installation. Disk Manager software. Information on obtaining a copy of Ontrack's Disk Manager can be found on the Web at www.ibm.com/harddrive. Setting the jumpers 1. Refer to your computer manual to determine if you require the 15- or 16-head logical architecture. 3. Always handle the drive with care to prevent 2. In a one drive system, configure your new drive as damage from shock, vibration, or electrostatic Master (Device 0). discharge (ESD). 3. In a two drive system, one drive must be desig- 4. Do not open the static-protective bag containing the nated as the Master, the other as the Slave (Device 1) drive until required. Static electricity can damage the 4. When installing the new drive as a Slave, check the drive. Master drive to determine if a jumper change is 5. Turn off and unplug your computer. Remove the required to indicate that a Slave drive is present. cover. 5. Consult your manual to see if your computer 6. When installing the drive, touch a grounded, supports Cable Select before choosing